Feed Roller Ap - Muratec F-360 Field Engineering Manual

FEED ROLLER AP

1. Remove the REAR COVER and FRONT COVER.
2. Remove the POWER SUPPLY UNIT.
3. Remove the CONNECT PRINTER PCB.
4. Remove the DRIVE GEAR ASSEMBLY.
5. Remove the HVPS.
6. Remove the MAIN FRAME mounting screws.
Main frame
7. Remove the E-Rings at the both side of the FEED ROLLER AP and FEED GEAR 16.
8. Pull out the FEED ROLLER AP while pulling up the MAIN FRAME.
Main frame
Feed gear 16
Feed roller AP
5-41