Muratec F-360 Field Engineering Manual page 25

Fusing temperature
1) Warming Up After the initialization of the printer, printer warming starts and the Heater Lamp
turns ON until the temperature of the Heater Roller reaches approx. 180---190 °C.
2) Printing When the printer obtains the printing command from its controller, the Heater Roller
is maintained at 180---190 °C.
After printing, the printer re turns to standby mode. The fuser is kept at a low
temperature.
3) Standby mode The Heater Roller is maintained at approx. .160---170 °C.
4) Sleep mode Power Save mode.
F-360:
392 200
356 180
320 160
Warming up
Power ON
F-320:
401 205
374 190
338 170
Warming up
Power ON
Post card printing only
Printing
Standby mode
Post card printing only
Printing
Standby mode
2-14
Time
Sleep mode
Time
Sleep mode