Muratec F-360 Field Engineering Manual page 52

Memory Switch 00 - Dialer
Initial
Switch
Setting
Factory use only
7 0
Factory use only
6 0
Not used
5 0
Not used
4 0
DIS detect time after dialing
3 0 0: 80 sec
1: 70 sec
Factory use only
2 1
Dial tone detection
1 1 0: Do not dial
1: Dial
Phone line type
0 0: PSTN
0 1: PBX
Adjust
Sets the time DIS signal is detected after dialing a
number.
Determines if the unit proceeds with dialing or
indicates an error if no dial tone is detected within
five seconds of going off-hook.
When set to PSTN, the unit checks for dial tone and
acts according to the setting of memory switch 00,
bit 1. When set to PBX, the unit always dials a given
number of seconds after going off-hook. Memory
switch 01 sets the number of seconds.
3-27
Usage/Comments