Packaging Contents - Muratec F-360 Field Engineering Manual

6.9 IF-300

Packaging contents:

Internal Installation kit.
Note: Performing an All Ram Clear will erase the programmed data in the IF-300. If an All Ram
Clear has to be performed, disconnect the IF-300 from the F-360/320 main control pcb, perform the
Ram Clear, then reconnect.
1
4
5
2
3
1. IF-300 board ..................................................... 1
2. Connection cable (with ferrite core) .................. 1
3. Option cover C.................................................. 1
4. O.P. Shield B .................................................... 1
5. Screws (3 x 6)................................................... 2
For attaching the IF-300 to the F-360 (or F-320) which has a PCL option installed, the following parts are
needed.
3
1 2
4
5 6
7 8
9
10 11
1. Module cover .................................................... 1
2. Bottom Chassis ................................................ 1
3. Box panel.......................................................... 1
4. Angle plate ....................................................... 4
5. Screws (3 x 6)................................................. 13
6. Screws (3 x 8)................................................... 4
7. AC cable for AC adapter................................... 1
8. AC/DC converter............................................... 1
9. Ferrite core ....................................................... 1
10. Blind label ....................................................... 1
11. ID label............................................................ 1
6-34