Monitor Speaker On/Off - Muratec F-360 Field Engineering Manual

When "Please Call Service" message is displayed on the LCD
To access the printer maintenance modes to determine the cause of the "Please Call Service" error message.
1. Press MENU, *, 0, 6. Then select "Service Call" using the cursor key.
2. Press ENTER.
The kind of printer error will be displayed. If there are two or more problems, the number of problems is
displayed in the upper right of the LCD.
For example, when "Heater error" and "Drum Fuse Error" has occurred, the LCD shows:
If happens more printer troubles, press
3. Press STOP to exit this mode.
Note: See "4.14.2 Please Call Service," page 4-19 to 4-21 for the printer error messages and an
explanation of each are outlined.

3.9 Monitor speaker On/Off

If you need to monitor the signals of a fax communication, turn this mode to on. You can hear the signals with
the machine's speaker during fax transaction.
Note: Be sure to turn this mode to off after finishing your work.
To turn on this mode, press MENU, *, 0, 8.
To turn off this mode, press MENU, *, 0, 8.
Number of errors
to show the other printer error.
3-104