Pds / Thermistor; Exit Roller P - Muratec F-360 Field Engineering Manual

PDS / Thermistor

1. Remove the FIXING UNIT. (See page 5-37.)
2. Remove the FIXING UNIT COVER, and then remove the PDS or the thermistor.
Fxing unit cover
Themistor
PDF

EXIT ROLLER P

1. Remove the FIXING UNIT. (See page 5-37.)
2. Disassemble the FIXING UNIT to remove the EXIT ROLLER P.
Note: Do not bend the PLATE SPRING at removing or attaching the EXIT ROLLER P.
Exit roller P
Plate spring
5-38