Muratec F-360 Field Engineering Manual page 126

Attribute 4 - Individual Autodialer
Initial
Switch
Setting
7 0 ANSam detection
0: Yes
1: No
6 0 V.34 transmission
0: Yes
1: No
5 0 CSI/TSI/CIG transmit
0: Yes
1: No
4 0 ECM mode
0: On
1: Off
3 0 Retransmit automatically
when receiving RTN/PIN
signals
0: Yes
1: No
2 1 Factory use only
1 0 Factory use only
0 0 Factory use only
Setting (Equivalent to Memory Switch 13)
Adjust
During the V8 handshake, if some noise disturbs
the handshake and an error occurs, set to "1".
Individual setting for V.34 transmission.
When set at "1", transmission of the CSI, TSI and
CIG signals are disabled.
Determines ECM mode. ECM mode reduces
document memory and may lengthen transmission
and reception times.
When set to "1", retransmission disables
automatically if receiving RTN/PIN signals.
3-101
Usage/Comments