Option Cover A; Rx Exit Cover - Muratec F-360 Field Engineering Manual

OPTION COVER A

1. Remove the option cover A mounting screw.
2. Remove the OPTION COVER A.

RX EXIT COVER

1. Remove the EXIT TRAY. (See page 5-9.)
2. Remove the OPTION COVER A. (See page 5-10.)
3. Remove the Rx exit cover mounting screw, and then remove the RX EXIT COVER.
Note: Release the two tabs at the upper part of Rx exit cover with the screwdriver as illustration below.
4. Separate the RX EXIT COVER from RX EXIT COVER B.
Rx exit cover
Rx exit cover B
5-10