Muratec F-360 Field Engineering Manual page 288

Unique Switch 55 - Printer
Initial
Switch
Setting
Factory use only
7 1
6 0 Limit of the memory capacity
in Reverse order print
F-320 Setting
5 1
Ignore the size error with
bypass tray
4 0
0: No
1: Yes
Factory use only
3 0
Disable the printing margin
2 0 0: No (204 mm print)
1: Yes (210 mm print)
Factory use only
1 0
Primary copying upon
printing the received data
0 1
0: No
1: Yes
Adjust
Determine the limit of the memory capacity for
storing the received document in the reverse order
print. If the data reached to this limit during
receiving, the normal order print will start.
Switch 6 5
If this switch is set "1", the machine doesn't detect
the paper mismatch error when using the bypass
tray.
When this switch is set to "1", the machine will not
mask the both side of the printed document.
Note: This switch is available only for European
version.
Setting to "1", the copying job will interrupt the
printing job of received document.
19
Usage/Comments
0 0 126 KB
0 1 521 KB
1 0 1024 KB
1 1 2048 KB