Installation - Muratec F-360 Field Engineering Manual

Installation

1. Turn off your fax machine and your computer.
2. Remove two screws on the RS-232C PCB, and then attach the bracket to the RS-232C PCB. If your
machine is F-360, join the RS-232C PCB and the Connecter PCB.
F-360
3. Remove the mounting screw holding the option cover in place. Then remove the option cover.
4. Use pliers to gently punch out the rectangular connector space located in the right of the option cover.
5. Open the top cover.
6. Remove five mounting screws holding the rear cover in place. Then remove the rear cover.
7. Remove four mounting screws holding the shield plate in place. Then remove the shield plate.
8. Connect the RS-232C PCB assembly to the Main control PCB with the connection cable as shown
below:
2 ",
2
6-5
F-320