Inner Cover; Right Cover - Muratec F-360 Field Engineering Manual

INNER COVER A
1. Open the upper cover.
2. Remove the two Inner cover mounting screws, then remove the INNER COVER A.
Inner cover A

RIGHT COVER

1. Remove the FRONT COVER. (See page 5-6.)
2. Remove the REAR COVER. (See 5-7.)
3. Remove the two right cover mounting screws.
4. Slide the line cover and disconnect the harnesses of the TOS sensor and the HPES sensor.
5. Then remove the RIGHT COVER.
Right cover
Line cover
5-11