Feed Roller A - Muratec F-360 Field Engineering Manual

FEED ROLLER A

1. Remove the PANEL COVER. (See page 5-8.)
2. Remove the UPPER COVER / TOP COVER / REAR COVER. (See page 5-7.)
2. Remove the ADF MOTOR. (See page on page 5-25.)
3. Pull out the PULLEY 58/16 G23. (See page 5-26.)
4. Remove the F.G. wire mounting screw.
5. Remove the E-ring, and then remove the PULLEY 18.
6. Remove the E-ring on the other side, and then remove the INNER GUIDE A assembly.
Inner guide A assembly
Pulley 18
7. Remove the RETARD COVER, RETARD ROLLER assembly and TORQUE LIMITOR. (See page 5-24)
8. Remove the FEED ROLLER A from the INNER GUIDE A assembly.
Exit roller
Exit gear 27
5-28