Muratec F-360 Field Engineering Manual page 59

Memory Switch 16 - Transmission
Initial
Switch
Setting
7 0 Not used
6 0 Factory use only
5 0 Factory use only
4 0 Factory use only
3 1 Additional data on TTI
transmit
0: No
1: Yes
2 1 Subscriber ID transmit
0: No
1: Yes
1 1 TTI (name) transmit
0: No
1: Yes
0 0 Not used
Memory Switch 17 to 19 - Transmission
Initial
Switch
Setting
Not used
7 0
Not used
6 0
Not used
5 0
Not used
4 0
Not used
3 0
Not used
2 0
Not used
1 0
Not used
0 0
Adjust
When set at "0", the transmission of the additional
data (time, the number of pages, file number, etc)
is disabled.
Note: This switch is available only when Memory
switch 12, bit 4 and/or Memory switch 13, bit 5 is
available.
When set at "0", the transmission of the subscriber
ID is disabled.
Note: This switch is available only when Memory
switch 12, bit 4 and/or Memory switch 13, bit 5 is
available.
When set at "0", the transmission of the name
which was stored in the unit is disabled.
Note: This switch is available only when Memory
switch 12, bit 4 and/or Memory switch 13, bit 5 is
available.
Adjust
3-34
Usage/Comments
Usage/Comments