Feed Roller B - Muratec F-360 Field Engineering Manual

FEED ROLLER B

1. Remove the PANEL COVER. (See page 5-8.)
2. Remove the UPPER COVER / TOP REAR COVER / REAR COVER. (See page 5-7.)
3. Remove the ADF MOTOR. (See page 5-25.)
4. Remove two INNER GUIDE A assembly. (See page 5-28.)
5. Remove two INNER GUIDE B mounting screws, and then remove the INNER GUIDE B.
6. Remove two E-rings on the right and left of the FEED ROLLER B, and then remove the PULLEY 18 and
bearings.
Inner guide C
Feed roller B
Pulley 18
Inner guide D
7. Remove the INNER GUIDE C.
8. Remove the INNER GUIDE D.
9. Remove the FEED ROLLER B.
5-29