Printer Section; Cover Switch; Casop - Muratec F-360 Field Engineering Manual

5.2.5 Printer section

COVER SWITCH

1. Remove the REAR COVER. (See page 5-7.)
2. Remove the CONNECT PRINTER PCB. (See page 5-17.)
3. Remove two COVER SWITCH mounting screws, and then remove the COVER SWITCH.
Cover switch

CASOP

1. Remove the REAR COVER. (See page 5-7.)
2. Remove the CONNECT PRINTER PCB. (See page 5-17.)
3. Remove the PSU. (See page 5-16.)
4. Remove the CASOP mounting screw, and then remove the CASOP.
CASOP
5-33