Cleaning The Fbs; If You Have Unsatisfactory Printout Quality; Cleaning The Led Print Head; Storing The Toner And Drum Cartridge(S) - Muratec MFX-1500 Operating Instructions Manual

Just in case . . .
5.
Open the inner cover.
Important: You must hold the cover open. It won't stay open by itself.
6. Use the cloth with the rollers
cleaner to clean the face of the
rollers. Rotate the rollers by
hand to allow cleaning of the
entire roller surface.
7. Use the cloth with isopropyl alcohol
to clean the contact glass.
Important: You must hold the
cover open. It won't
stay open by itself.
8.
Gently close the scanner cover, making sure both sides are snapped
down securely.
Cleaning the
FBS
1.
Open the book cover.
2.
Get a soft, lint-free cloth and moisten it with isopropyl alcohol.
Important: Make sure the cloth doesn't have any rough areas.
Otherwise, it could scratch the glass surface of the
3.
Using the cloth, gently clean the glass
surface of the and the white
FBS
background area on the underside of
the book cover.
3.14

If you have unsatisfactory printout quality

Your machine automatically cleans its charger and transport roller, two items
which are very important to printout quality. So, if you notice poor printout quality
(whether on received faxes or on copies), it may mean that your machine requires
service. Review "Print quality problems" (pages 3.5–3.6), and see whether any of
the proposed solutions helps your machine. If none do, please call your authorized
Muratec dealer or call the Muratec Customer Support Center at (972) 364-3350.
Cleaning the
If you find your fax recipients complaining that the faxes you receive or copy
image quality are streaked, the
1. Turn off your fax machine.
2. Get a soft, lint-free cloth
and moisten it with
isopropyl alcohol.
3. Open the top cover and
then open the printer cover.
CAUTION
!
:
The fuser unit of orange color becomes very hot. Do not touch the fuser unit
when you are cleaning the LED print head.
4. Using the cloth, gently clean the
Note: Do not use abrasive materials on the

Storing the toner and drum cartridge(s)

Follow these guidelines when you store the machine's toner and drum cartridges.
Do not unpack a cartridge until you are ready to install it.
.
FBS
Store cartridges at a constant temperature within a range of 23º to 95º
35º .), as well as a humidity range of 10% to 80%.
C
print head
LED
print head may be dirty.
LED
print head.
LED
print head.
LED
. (-5º to
F