Step 2: Determining The Actual Paper Size Used For Printing; Reducing And Splitting; When [Tray Selection For Rx Print] Is Set To A Specific Drawer - Muratec MFX-C3035 User Manual

Step 2: Determining the actual paper size used for printing

The machine checks if paper of the most suitable size determined in step 1 is
loaded.
If paper of the most suitable size is loaded, printing begins.
If paper of the most suitable size is not loaded, or if the Auto Tray Switch
function is disabled, the machine checks for paper of the next most suit-
able size in the order listed in the following table, starting from the top.
Most suitable paper
size
Order for selecting
paper
(from top to bottom)
If no paper suitable for printing is loaded in a paper drawer, a message
appears, instructing that paper be loaded.
For details on the Auto Tray Switch function, refer to the [Printer/
Copier/Scanner User's Guide].

Reducing and splitting

The following four reducing and splitting operations are performed when a
received document is printed, depending on the selected settings.
For details on the reducing and splitting settings for printing received
documents, refer to "[Function Settings]" on page 2-12.
When [Tray Selection for RX Print] is set to a specific
drawer
If the received document is the same size or is shorter than the paper
loaded in the drawer, the image is printed reduced by the specified reduc-
tion ratio (between 87% and 96%).
If the received document is longer than the paper loaded in the drawer,
the image is automatically reduced (between 75% and 96%) and printed.
If the received document still does not fit within the paper, even after being
reduced up to 75%, any part of the image that does not fit within the paper
will be lost.
The pages cannot be split.
4-12
A4 Letter
A4 Letter
A4
Legal
Printing received faxes
Legal
Legal
Letter
A4