Operating The Digital Operator - Omron VS mini J7 User Manual

Operating the Digital Operator

All functions of the VS mini are set by the digital operator. Below are
descriptions of the display and keypad sections.
Data display section
Press to switch
between
function LEDs.
Press to enter the
constant data.
(Displays the constant
data when
selecting constant no.
by PRGM LED.)
Press to increase
constant no./data
value.
Function display LEDs ( Color in parenthesis indicates the color of LED. )
FREF
Frequency reference
setting/monitoring
(GREEN)
F/R
Operator RUN
command FWD/REV
selection
(GREEN)
DIGITAL OPERATOR
Press to decrease
constant no./data
value.
FOUT
Output frequency
monitor
(GREEN)
Status indicator
Press to run
the motor.
Press to stop the motor.
(Press to reset at faults.)
IOUT
Output current
monitor
(GREEN)
LO/RE
LOCAL/REMOTE
Constant no./data
Selection
(RED)
Function display LEDs
LED switches to another
function each time
DSPL is pressed.
The displayed data can
be changed.
Frequency setting
potentiometer
Changes frequency
setting according to
potentiometer.
MNTR
Multi-function
monitor
(GREEN)
PRGM
(RED)
29