Further Functions; Menu Overview; Change Date / Time; Master Password - Bosch MPC-xxxx-B Operation Manual

Panel Controller
19

Further functions

This chapter contains information about the following points:
–
–
–
–
–
–
19.1

Menu overview

Further functions
19.2

Change Date / Time

To change the date and time:
1.
2.
3.
4.
19.3

Master password

NOTICE!
With the master password, all functions can be operated and passwords and names can be
changed.
One of the two options will be offered, depending on how the panel is programmed:
–
–
NOTICE!
The Support department can be reached on the following number: +49 (0)89-62 90 18 88.
Business hours:
–
–
Bosch Sicherheitssysteme GmbH
Section 19.2 Change Date / Time, page 85
Section 19.3 Master password, page 85
Section 19.4 Remote Access, page 86
Section 19.5 Change password, page 87
Section 19.6 Performing a fire drill, page 87
Section 19.7 Alarm Counters, page 88
-> Change date / time
Select Further functions in the start menu
Change date / time
Touch the field you require and enter a new value.
Refer to Section 5.8 Entering numbers and text, page 31 for information on how to enter
figures or text.
Select OK to confirm the entry or Cancel to cancel the operation.
The new values for date and time are accepted into the system.
Entering a master password that is valid indefinitely.
This password cannot be changed and is available from the relevant Bosch branch on
request.
Entering a master password that is valid for a specified period of time.
This password is only valid for 24 hours. The panel controller can issue a number on
request. This number must be forwarded to the Support department. The Support
department can then issue a 24-hour password; see Section 19.3.2 Enter the 24-hour
master password, page 86.
Monday to Thursday from 8 am to 5 pm
Friday from 8 am to 4 pm
Operation guide
Remote access
Drill
Further functions | en
Master password
Change password
Alarm counters
F.01U.076.969 | 6.0 | 2010.04
85