Alarm Counters - Bosch MPC-xxxx-B Operation Manual

88 en | Further functions
Display switches to
Fire drill after event ends
A new function cannot be selected until the fault/supervisory alarm and/or the fire drill have
been completed.
19.7

Alarm Counters

Show Lifetime Event Counters
During the lifetime of the panel, the following alarm messages are counted:
–
–
–
To display the number of alarm messages which have been counted so far:
1.
2.
The figure after the message type shows the number of messages counted so far.
Reset counters
You can reset the alarm counter for individual alarm types to 0.
To reset alarm counters
1.
2.
3.
4.
5.
NOTICE!
In order to reset alarm counters, you need authorization level 4.
F.01U.076.969 | 6.0 | 2010.04
External alarm: all fire messages
Internal alarm: all alarm messages that the panel receives in day mode
Walktest alarm: all messages from detectors switched to walktest
Select Further functions in the start menu
Alarm counters
Select Further functions in the start menu
Alarm counters
Mark the alarm counter you require (e.g. external alarm)
Select Reset
Confirm the message "Attention: Counter will be reset" with OK to reset the alarm
counter to 0 or select Cancel to cancel the operation.
Operation guide
Fire alarm
Alarm indication
Must be restarted
manually
Panel Controller
Fault/
supervisory alarm
Fault indication
Continue
Bosch Sicherheitssysteme GmbH