Change Language; Activate Outputs; Activate The Transmission Device; Detector Removal - Bosch MPC-xxxx-B Operation Manual

Panel Controller
3.4.2

Change language

Change the language of the display (Change language).
3.4.3

Activate Outputs

Activate outputs:
–
–
–
–
–
Start and terminate activation of the selected elements.
3.4.4

Activate the transmission device

Activate a selected transmission unit (Activate transmission device).
3.4.5

Detector removal

Bypass all sounders and transmission devices for 15 minutes while a detector is being
removed (Remove detector).
3.4.6

History Log

–
–
–
The following filters are available:
Filter
Without filter
Show all
Delete filter
Period
Event types
Device types
Address range
User commands
Walktest
3.4.7

Change device on V.24 Interface

Assign a different device to the V.24 interface (Change device at V.24 interface).
Bosch Sicherheitssysteme GmbH
Select by number:
Display of a list of all controllable elements.
Search for an element in a list by entering the number.
Sounder
Strobe
HVAC
More...
Filtering and displaying specific data
Combining various filters
Print out all filtered data or a specific part of the data
Operation guide
Data, filtered by...
All data
Display all data with specification of event number, date, time,
element number and message type. Existing filters are
deleted.
Starting date, end date and time
Message types, such as Fault
Device types, such as Detectors
Address range within a system
Selected function fields such as Acknowledge or Reset
Elements switched to walktest mode
All functions at a glance | en
F.01U.076.969 | 6.0 | 2010.04
15