Maintenance - History Log; Selecting Filters; Setting Filters - Bosch MPC-xxxx-B Operation Manual

Panel Controller
16 Maintenance – history log
In the history log, all data about particular events or device types is stored sorted by date and
time. To display only particular data, filters can be set.
In addition to a menu overview, this chapter contains information about the following points:
–
–
–
–
–
–
16.1

Selecting filters

The following filters are available:
Filter
Without filter
Show all
Delete filter
Period
Event types
Device types
Address range
User commands
Walktest
If one or more filters have been set, the Change filter field in the status bar is highlighted in a
dark color.
16.2

Setting filters

To display only particular data, a filter can be set.
Example:
To display only data that was stored in connection with a particular event, such as Fault:
1.
2.
3.
4.
5.
Bosch Sicherheitssysteme GmbH
Section 16.1 Selecting filters, page 73
Section 16.2 Setting filters, page 73
Section 16.3 Change Filter, page 74
Section 16.4 Combining several filters, page 74
Section 16.5 Status bar functions, page 74
Section 16.6 Printing out data, page 75
Select Maintenance from the start menu
History log
Select the Event types filter.
A list of all event types is displayed.
Select a list field, for instance Fault.
In the status bar, the Change filter field has a black background. See also
Section 16.3 Change Filter, page 74.
Select Show in history log.
A list of all fault messages is displayed. The events are sorted in ascending order by date
and time.
The fault messages are numbered chronologically.
The leading number indicates the sequence in which the fault messages were received.
Operation guide
Data, filtered by...
All data
Display all data with specification of event number, date, time,
element number and message type. Existing filters are
deleted.
Starting date, end date and time
Message types, such as Fault
Device types, such as Detectors
Address range within a system
Selected function fields such as Acknowledge or Reset.
Elements switched to walktest mode
Maintenance – history log | en
F.01U.076.969 | 6.0 | 2010.04
73