Bypassing Detectors - Bosch MPC-xxxx-B Operation Manual

48 en | Fire alarm
If different elements are offered for resetting:
1.
2.
3.
TEXT
If a list field is marked with an R, the process of resetting is not yet complete for this element.
If an element cannot be reset, it will continue to be displayed in the list.
After the successful resetting of all elements, the standby display is displayed.
9.8

Bypassing detectors

To bypass a detector that has triggered an alarm:
1.
2.
NOTICE!
The system does not transmit any information as to whether it was possible to bypass the
selected element. To monitor the operation, please check the element.
F.01U.076.969 | 6.0 | 2010.04
Select an element. At the menu items Zone and Detector, a list with all the logical zones
and detectors concerned appears.
Select the list field you require. Refer to Section 5.6.1 Scrolling through lists, page 28 for
information on how to scroll forward and backward through a list.
The list field is marked.
Select Reset.
The selected element / element group is reset.
R
Select the alarm message you require.
Select Bypass.
Operation guide
Panel Controller
Bosch Sicherheitssysteme GmbH