Adding Or Deleting Elements - Bosch MPC-xxxx-B Operation Manual

Panel Controller
15.1.1

Adding or deleting elements

In order to add elements to a walktest group or remove elements from it:
1.
2.
3.
4.
NOTICE!
The deleted elements are assigned to the Unassigned elements group.
To change the name of the walktest group, see Section Change name, page 70.
Toggle function
New elements can be added and existing elements deleted in every submenu.
Add
When one of the function fields is selected, the display changes and a new function can be
performed.
+
New
Select this function field to add one or more new elements.
Only those elements which have not been assigned to any walktest group yet will be
displayed.
Various element categories are displayed.
1.
2.
3.
Delete
-
Old
Select this function field to delete one or more elements.
Only elements from the selected walktest group are displayed.
1.
2.
Bosch Sicherheitssysteme GmbH
Select Maintenance from the start menu
Walktest
Create / Change walktest group
A list of the walktest groups is displayed.
Select a walktest group, e.g. February.
You can choose from a number of options:
– Delete all: Delete all elements in the selected group.
– Show / Change: Display all elements in the selected walktest group and delete
individual elements.
– Add: Display all elements that have not yet been assigned to a walktest group, and
add individual elements.
– Cancel: Cancel the operation.
Select the category you require.
A list of elements is displayed. See also Section 5.6 Working with lists, page 27.
Select an element.
The element is marked.
Select Add.
The selected element is added to the group.
Select an element.
The element is marked.
Select Delete.
The selected element is deleted from the group.
Operation guide
Maintenance – walktest | en
F.01U.076.969 | 6.0 | 2010.04
69