Enter The Master Password That Is Valid Indefinitely; Enter The 24-Hour Master Password; Remote Access - Bosch MPC-xxxx-B Operation Manual

86 en | Further functions
After the password has been entered, various options are offered depending on the
configuration; see Section 18.5 Operator, page 83.
19.3.1

Enter the master password that is valid indefinitely

1.
2.
3.
4.
19.3.2

Enter the 24-hour master password

The following procedure must be followed in order to obtain a 24-hour master password:
The panel controller generates a number on request. The operator forwards this number to
the relevant NSO by telephone. The NSO gives the user a password which is only valid for 24
hours.
1.
2.
3.
4.
5.
6.
7.
Change password
To change passwords, select Change password.
Depending on the configuration, additional options may be offered. See also
Section 18.5 Operator, page 83.
19.4

Remote Access

NOTICE!
If another menu is called up while the connection to the Remote Access is still active, the
following text is displayed: RAM active.
To blank out the text, touch the screen.
The text re-appears every 30 seconds for as long as the Teleservice connection remains active.
To create a connection to the teleservice:
1.
2.
3.
F.01U.076.969 | 6.0 | 2010.04
Select Further functions in the start menu
Master password
Enter the master password. Refer to Section 5.8 Entering numbers and text, page 31 for
information on how to enter figures or text.
Select OK to confirm the entry or Cancel to cancel the operation.
The master password is accepted and the operator is logged in.
The user passwords can now be changed:
Select Change password.
Depending on the configuration, additional options may be offered. See also
Section 18.5 Operator, page 83.
Select Further functions in the start menu
Master password
Create number
Request password
A number is displayed.
Give the number issued by the system to the Support department.
Once you have received the 24-hour password from the Support department, select
Enter password!.
Enter the password.
The 24-hour master password is accepted and the user is logged on.
Select Further functions in the start menu
Remote access
Enable call
The Remote Access can now call the system. Afterwards, the connection is disconnected.
Operation guide
Panel Controller
Bosch Sicherheitssysteme GmbH