Via The Status Bar; Bypassing/Un-Bypassing Buzzer - Bosch MPC-xxxx-B Operation Manual

56 en | Bypass
11.4.2

Via the status bar

To display a list of all bypassed elements:
1.
2.
3.
To un-bypass bypassed elements:
1.
2.
11.5

Bypassing/Un-bypassing buzzer

In order to prevent an acoustic warning tone being sent to the panel during maintenance
work, for example, the panel's internal buzzer can be permanently bypassed.
To bypass the internal buzzer, select the following in the start menu:
1.
2.
3.
4.
NOTICE!
If you switch the internal buzzer off permanently, no acoustic signal will sound on the panel in
the event of an alarm or fault!
F.01U.076.969 | 6.0 | 2010.04
Select Bypass on the status bar.
A list of various states is displayed.
Select Bypassed.
A list of various element categories is displayed.
The listed number displays the number of bypassed elements or element groups in the
relevant element category.
Select the list field you require, e.g. Detector.
A list of all bypassed elements is displayed.
Select the elements you require.
Select Un-bypass.
Bypass Block
Bypass
More...
Bypass buzzer
The buzzer is bypassed and the text on the user interface changes to Unbypass buzzer.
To un-bypass the buzzer again, select Unbypass buzzer in step 4.
Operation guide
Panel Controller
Bosch Sicherheitssysteme GmbH