Printing Out Data - Bosch MPC-xxxx-B Operation Manual

Panel Controller
16.6

Printing out data

Either the complete list or a specific part of it can be printed out.
To print out data that is displayed on a list:
1.
2.
3.
4.
5.
6.
7.
Event numbers
To display the event numbers again:
1.
2.
Bosch Sicherheitssysteme GmbH
Select Print on the status bar.
Two possibilities are offered:
– Entire list: the complete list is selected.
To print the list, continue with step 6.
– Define range: an exact range is defined within the list.
The following two possibilities are available to specify the area of the list to be printed
out:
– Limit the number of events, counted from the newest event.
– Specifying a particular area via the entry of the event numbers.
Select Define range.
Two possibilities are offered on the display.
Activate the checkbox in front of one of the two options:
– Number of events to be printed starting from latest event:
For the printout, enter a particular number of events, counted from the most recent
event.
– Event numbers to be printed:
To print out a particular range, specify by entering event numbers.
A checkmark is placed in the selection field.
Enter the numbers you require.
To enter a number, see Section 5.8 Entering numbers and text, page 31.
Select OK to confirm the entry.
A list of the printers that can be selected is displayed.
Select a printer.
Select Print.
The list is printed.
Select Show event numbers.
To exit the display, press the "Back" key.
Operation guide
Maintenance – history log | en
F.01U.076.969 | 6.0 | 2010.04
75