Panel Controller
2.3
Maintenance
Clean the touch screen and membrane keypad with a soft cloth only. If necessary, dampen the
cloth lightly with standard monitor cleaning agents. Do not use any aggressive cleaning agents
and ensure that no liquid enters the inside of the device.
2.4
Usage in accordance with regulations
The panel controller is designed for operating the FPA-5000 and FPA-1200 fire panels. It can
perform the following tasks:
–
–
–
–
–
–
–
–
2.5
Skills required by personnel
Display of event messages on the panel controller must only be processed by trained
personnel.
The system walktest and detector configuration must only be performed by trained,
authorized personnel.
Bosch Sicherheitssysteme GmbH
Displaying and processing various message types such as alarm and trouble messages
Bypassing, isolating and resetting elements
Performing a walktest
Display diagnostic information about every LSN element
Programming detectors (short texts and detector sensitivity)
Performing a drill
Saving, displaying and printing out events
Switching the system to day or night mode.
Operation guide
For your safety | en
11
F.01U.076.969 | 6.0 | 2010.04