Change Name; Group Setting; Adding Or Removing - Bosch MPC-xxxx-B Operation Manual

Panel Controller
Example:
1.
2.
3.
In order to add new elements:
1.
2.
3.
4.
18.2.2

Change name

To change the name of the input or output group:
1.
2.
18.3

Group setting

Bypass, isolate and walktest groups can be created using the FSP-5000-RPS programming
software.
Each group can consist of one or more element(s).
You can use the panel controller to carry out the following:
–
–
18.3.1

Adding or removing

Bypass Group
In order to add elements to a bypass group or remove elements from it:
1.
2.
3.
4.
5.
Bosch Sicherheitssysteme GmbH
Select Show / Change.
To delete one or more element(s) from the selected group:
Select one or more list fields.
The list fields are marked. Refer to Section 5.6.1 Scrolling through lists, page 28 for
information on how to navigate through a list.
Select Delete.
The element is deleted from the selected group. The list field is no longer displayed.
Select New.
The display changes. Various element categories containing elements which have not
been assigned to any walktest group yet are displayed.
Select the element category you require.
Select one or more list fields.
The list fields are marked.
Select Add
The selected element is added to the selected walktest group.
Overwrite the name; see Section 5.8 Entering numbers and text, page 31.
Select OK.
The new name is confirmed.
Adding elements to or removing elements from bypass, isolate and walktest groups.
Renaming bypass, isolate and walktest groups.
Select Configuration in the start menu
Set groups
Bypass group
Two different sorting criteria are displayed. See also Section 5.6 Working with lists,
page 27.
Select a list type, e.g. By number.
A list of all bypass groups is displayed. The number in brackets specifies the number of
elements in the bypass group in question. Refer to Section 5.6.1 Scrolling through lists,
page 28 for information on how to scroll forward and backward through the list.
Select the list field you require.
You can choose between various options. To add elements to a group or remove
elements from it, see Section 18.3.1 Adding or removing, page 81.
Operation guide
Configuration | en 81
F.01U.076.969 | 6.0 | 2010.04