Maintenance; Walktest - Bosch MPC-xxxx-B Operation Manual

14 en | All functions at a glance
LED test on modules
Test LED displays of individual modules and simultaneously test all LED displays.
History log
See Maintenance – history log
Network
Information on availability of other nodes within the system network.
VAS
Information on all connected electro-acoustic systems that are used for voice evacuation
systems.
3.4

Maintenance

Maintenance
3.4.1

Walktest

Start / End walktest
Elements for the walktest are selected in this submenu. The following possibilities are offered
for selection:
–
–
–
–
–
–
–
–
When the walktest is complete, the following selection options are available:
–
–
–
Create / Change walktest group
–
–
F.01U.076.969 | 6.0 | 2010.04
-> Walktest
Activate outputs
Remove detector
Change device
at V.24 interface
Select by number:
Display of a list of all elements:
Search for an element in a list by entering the number.
Walktest group
Loop
Logical zone
Elements
Transmission device
Control element
More...
– DACT
– Key deposit
– Battery
– Mains power
Add the tested elements to a different walktest group (Assign tested elements to
walktest group).
Continue the walktest (No).
Display tested or untested elements (Not tested, Tested).
Deleting or adding individual elements to specified walktest groups.
Delete all elements in a walktest group.
Operation guide
Change language
Activate
transmission device
History log
Bypass buzzer
Bosch Sicherheitssysteme GmbH
Panel Controller