Information About Individual Elements; Displaying Additional Information - Bosch MPC-xxxx-B Operation Manual

52 en | Fault message
10.2.6

Information about individual elements

The trouble message contains information about:
–
–
–
–
–
Example:
Fault
#002
Element category:
Message type:
Element address
Message number
Installation location of the
element
NOTICE!
Depending on the configuration of the system, either the logical or physical address of the
element is displayed.
To display more information about an alarm message, see Section 10.2.7 Displaying additional
information, page 52.
10.2.7

Displaying additional information

To display further information about the individual elements, select the fault message you
require.
NOTICE!
The information displayed is entered in the FSP-5000-RPS programming software.
The following information is displayed:
–
–
–
–
–
–
Select OK to return to the list of all fault messages. Reset, see Section 10.3 Resetting
malfunction message, page 53.
Block, see Section 10.4 Isolating an element, page 53.
F.01U.076.969 | 6.0 | 2010.04
Element category
Message type
Element address
Message number
Additional information (e.g. the installation location, depending on the configuration)
Transmission device 00026-
Cafeteria
Element category
Message type
Date and time of the message
Physical and logical addressing of the element
Only for LSN detectors: specification of the detector type
Action text (depending on the configuration)
Operation guide
004
Transmission device
Fault
The following transmission device has caused a fault:
0005 - 004: The fourth transmission device (004) in the 26th
group (00026).
The fault messages are numbered chronologically.
The message number in the second line indicates the sequence
in which the fault messages were received.
002: The second fault message to be received.
Cafeteria
Panel Controller
Bosch Sicherheitssysteme GmbH