Switching To Day Or Night Mode; Further Functions - Bosch MPC-xxxx-C Series User Manual

Panel controller
Hide thumbs Also See for MPC-xxxx-C Series:
Table of Contents

Advertisement

Panel Controller
Notice!
Changes may only be made by trained specialist personnel. Competent knowledge of
networking and protocols is essential!
3.6

Switching to day or night mode

3.7

Further functions

Further functions
Change date / time
Change the time and date
Master password
Depending on how the panel is configured, one of these two options will be offered:
After the password has been entered, various options are offered depending on the
configuration; see Operator, page 86.
Drill
Start and terminate a fire drill. During the drill, fire alarms, trouble messages and home
automation alarms are displayed.
Remote Services
Change password
Depending on how the panel is configured, the option of changing the password for every user
is offered.
Alarm counters
Bosch Sicherheitssysteme GmbH
Change date / time
If starting the panel for the first time enter the current time and date. The setting of the
correct date is a prerequisite for connecting the panel to the Remote Portal server.
Remote ID:
Enter the Remote ID: required for all Remote Services, e.g. Remote Connect and change
the System ID: if necessary.
Switch to day or night mode
In day mode: Set the reset time to night mode for the current day.
-> Change date / time
Entering a master password that is valid indefinitely.
This password cannot be changed and is available from the relevant Bosch branch on
request
Entering a master password that is valid for a specified period of time. This password is
only valid for 24 hours and must first be requested; see Master password, page 89.
Enable a remote access connection via telephone.
Block Remote Maintenance until next panel reboot.
Block Remote Alert until next panel reboot.
Display the number of internal and external alarm messages and the number of service
alarms that were reported during the lifetime of the panel.
Reset the alarm counter for each alarm type
Remote access
Drill
User Guide
All functions at a glance | en
Master password
Change password
Alarm counters
2017.09 | 7.0 | F.01U.258.929
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fpa-1200-mpc-c

Table of Contents