Isolate; Menu Overview; Isolating And De-Isolating Elements - Bosch MPC-xxxx-B Operation Manual

Panel Controller
12

Isolate

This chapter contains information about the following points:
–
–
CAUTION!
Bypassed detectors: Alarm messages from bypassed detectors are no longer displayed, only
faults.
Isolated detectors: Isolated detectors are not analyzed.
12.1

Menu overview

Bypass -> Bypass
Block
Block
12.2

Isolating and de-isolating elements

Select the element you require in the submenu.
Example:
To isolate a detector, select the following in the start menu:
1.
2.
3.
4.
5.
6.
C
A C after a detector means that this detector is part of a closed group and cannot be isolated
individually. In order to isolate a detector marked in this way, please select Logical zone in
step 3.
Bosch Sicherheitssysteme GmbH
Section 12.2 Isolating and de-isolating elements, page 57
Section 12.3 Displaying list of all isolated elements, page 58
Show blocked devices
-> Sounder
Transmission device
Logical zone
Bypass Block
Block
Detector
Various selection criteria are displayed. See also Section 5.6 Working with lists, page 27.
Select a selection criterion, e.g. By description.
A list of the detectors is displayed. Refer to Section 5.6.1 Scrolling through lists, page 28
for information on how to scroll forward and backward through the list.
Select the required list fields.
The list fields are marked.
Select Block.
The selected elements are isolated.
To de-isolate the elements again, repeat all previous steps, but select Un-block in step 6.
Operation guide
Select by Block Group
number
Strobe HVAC
Detector Extinguishing
system
More... -> Control
element
Isolate | en 57
Printer
Doorholder
Annunciator
Interface
module
F.01U.076.969 | 6.0 | 2010.04