Operating Principle; Logging On And Off; Logging In - Bosch MPC-xxxx-B Operation Manual

Panel Controller
5

Operating principle

In addition to a brief menu overview, this chapter contains information about the following
points:
–
–
–
–
–
–
–
–
–
–
–
5.1

Logging on and off

To gain access to access levels 2 to 4, it is necessary to log in. The prerequisite is that you
have access authorization.
NOTICE!
To log in, you need a user ID and password.
Depending on your access authorization, you can use only particular functions.
In the following cases, you will be asked to enter a password:
–
–
5.1.1

Logging in

To log in to the panel controller:
1.
2.
3.
NOTICE!
If you do not have your own password, enter the following numbers: 000000.
Bosch Sicherheitssysteme GmbH
Section 5.1 Logging on and off, page 25
Section 5.2 Access authorization, page 26
Section 5.3 Calling up the start menu, page 26
Section 5.4 Selecting the menu, page 26
Section 5.5 Returning to the previous selection, page 27
Section 5.6 Working with lists, page 27
Section 5.7 Search Function/Element, page 30
Section 5.8 Entering numbers and text, page 31
Section 5.9 Changing language display, page 32
Section 5.10 Switching between status bars, page 33
Section 5.11 Logical and physical addressing, page 33
You are not logged on and want to select a function for which a password is required.
You are already logged in but a higher access authorization is required for the function
you have selected.
Press the "key" key.
The login window is displayed:
Enter your user ID in the first field.
Refer to Section 5.8 Entering numbers and text, page 31 for information on how to enter
numbers.
Enter your password in the second field.
On the display, each digit of the password is indicated with an asterisk so that nobody
else can see the password.
Operation guide
Operating principle | en 25
F.01U.076.969 | 6.0 | 2010.04