Changing Language Display; Warranty And Liability; Copyright - Bosch MPC-xxxx-B Operation Manual

Panel Controller
1.3

Changing language display

The panel language can be changed quickly with a shortcut; see the following instruction To
change the panel language using the menu, see Section 5.9 Changing language display,
page 32.
1.
2.
3.
4.
NOTICE!
After a system reboot following a power cut or battery failure, the default language set in the
FSP-5000-RPS is displayed again.
1.4

Warranty and liability

Warranty and liability claims for personal and property damage are excluded if these were
caused by one or several of the following causes:
–
–
–
–
–
–
Without the permission of Bosch, no changes or additions to or rebuilding of the panel
including the panel controller may be undertaken.
Rebuilding requires written permission. In case of non-approved constructional changes, any
warranty claims against Bosch are voided.
1.5

Copyright

Bosch retains the complete copyright to the whole documentation. Without the express
written permission of Bosch, no part of these documents may be duplicated or transmitted in
any form.
Bosch reserves the right to make changes to this manual without prior notice.
Bosch Sicherheitssysteme GmbH
Select the "home" key.
Then press 1 on the alphanumeric keypad immediately after this.
Select OK to confirm the entry or Cancel to cancel the operation.
A list of the existing languages is displayed.
Select the language you require.
The displays are displayed in the selected language.
Use of the FPA-5000 and FPA-1200 fire panels contrary to the regulations
Improper set-up, installation, start-up, operation or maintenance
Disregarding of the user manual
Subsequent constructional changes
Faulty repairs
Catastrophes, influence of foreign bodies, and force majeure.
Operation guide
For your information | en
F.01U.076.969 | 6.0 | 2010.04
9