90
en | Search Function/Element
21
Search Function/Element
This chapter contains information about the following points:
–
–
21.1
Menu overview
Search
function / element
21.2
Searching for function and device description
To search for a function or a device:
1.
2.
3.
21.3
Search element
To search for an element which is connected to the system:
1.
2.
3.
4.
F.01U.076.969 | 6.0 | 2010.04
Section 21.2 Searching for function and device description, page 90
Section 21.3 Search element, page 90
-> Search function
Select Search function / element in the start menu
Search function
A list of all functions and device descriptions is displayed.
Refer to Section 5.6.1 Scrolling through lists, page 28 for information on how to navigate
through a list.
Select the list field you require.
The submenu of the selected function or device description is displayed.
Select Search function / element in the start menu
Go to element
Three different lists are offered. See also Section 5.6 Working with lists, page 27.
Select a list, e.g. By description.
A list of the detectors is displayed. Refer to Section 5.6.1 Scrolling through lists, page 28
for information on how to navigate through a list.
Select the list field you require.
Different selection fields may be offered for the selected element (e.g. OK, Bypass).
What is displayed depends on:
–
the message types (e.g. fault, alarm etc.) that can be assigned to this element.
–
the mode (e.g. bypassed, reset etc.) that the selected element is in.
Operation guide
Go to element
Panel Controller
Bosch Sicherheitssysteme GmbH