Sequence Of The Alarm Messages; Information About Logical Zones In The Alarm State; The Newest Message - Bosch MPC-xxxx-B Operation Manual

42 en | Alarm
8.4.3

Sequence of the alarm messages

The messages are displayed in chronological order.
–
–
NOTICE!
30 seconds after the last entry (e.g. after scrolling through the list), the first and oldest alarm
is displayed at the beginning of the list again.
8.4.4

Information about logical zones in the alarm state

The alarm message contains information about:
–
–
–
–
–
–
Example:
Fire
#001
Message type
The message type Fire is reported.
Depending on the configuration, the message type may be defined more specifically, e.g. Fire
PAS for a fire alarm with alarm verification.
Address of logical zone
00005: the fifth logical zone triggered the first fire alarm.
Number of detectors
(6): In the fifth logical zone (00005), six detectors (6) triggered a fire alarm.
For logical zones that only consist of one element, no number of detectors is displayed.
NOTICE!
Depending on the configuration of the system, either the logical or physical address of the
detector is displayed.
Message number
The alarm messages are numbered chronologically.
The message number in the second line indicates the sequence in which the alarm messages
arrived.
#001: The first alarm message that came in.
Depending on the configuration, additional information is displayed in the second line, such
as the installation location of the logical zone.
8.4.5

The newest message

The latest message is always displayed at the end of the list.
The message number (e.g. #008) of the latest message indicates the total number of logical
zones in which one or more detectors have triggered an alarm.
F.01U.076.969 | 6.0 | 2010.04
The newest alarm message of a logical zone is always displayed at the end of the list.
The first and oldest alarm message of a logical zone is displayed at the beginning of the
list. The next three messages are displayed as you scroll through the list.
The element category
The message type
The address of the detector group
The number of detectors that have triggered an alarm in the respective logical zone
The message number
Depending on the configuration, additional information such as the installation location
Zone
Office 1
Operation guide
00005
(6)
Bosch Sicherheitssysteme GmbH
Panel Controller