Electro-Acoustic Systems - Bosch MPC-xxxx-B Operation Manual

64 en | Diagnostics
The following interfaces are designated:
–
–
–
–
–
A node number from 1 to 32 can be assigned to panels. All numbers above 240 (241-255) are
assigned dynamically and used, for instance, for an OPC server or a PC with FSP-5000-RPS
software.
13.8

Electro-acoustic systems

To display a list of all connected electro-acoustic systems that are used for voice evacuation:
1.
2.
To display information on an available electro-acoustic system:
1.
F.01U.076.969 | 6.0 | 2010.04
1.1
CAN 1 CAN 2
CAN 1 CAN 2
1.2
CAN 1 interface
CAN 2 interface
Ethernet
Serial Interface
USB 1 interface
Select Diagnostics in the start menu
VAS
A list of the available electro-acoustic systems is displayed.
Touch one of the systems displayed in order to select it. The following information is
displayed:
– Trouble (yes/no)
– Emergency (yes/no)
– Failure (yes/no)
– Internal supervision (yes/no)
– Supervision time (sec).
– Boot up phase is finished (yes/no)
– Failure at Controller (yes/no)
– Failure at Router (yes/no)
Operation guide
1.4
CAN 1 CAN 2
LEDs
CAN 1 CAN 2
1.3
Bosch Sicherheitssysteme GmbH
Panel Controller