Various States Of List Fields; Selecting Element/Function - Bosch MPC-xxxx-B Operation Manual

Panel Controller
5.6.2

Various states of list fields

Various states can be assigned to an element or an element group, depicted by a list field. The
following table provides information about the possible states:
List field
"Bypass" menu
In the Bypass menu, list fields can display additional information; see the following table:
List field
5.6.3

Selecting element/function

To select elements/functions from a list, touch one or more list fields on the touch screen
with your finger.
In order to scroll forward or backward, select the up arrow (back) or the down arrow
(forward):
To scroll quickly using the scrollbar, select the "double arrow" key on the membrane keypad.
The activated list field is marked.
To search for and display a particular element; see Section 5.7 Search Function/Element,
page 30.
Bosch Sicherheitssysteme GmbH
State of
list field
normal
TEXT
marked
TEXT
Mode assigned
TEXT
Mode assigned
TEXT
and marked
In reset mode
R
TEXT
TEXT
TEXT
Details
Meaning
Element in normal state
Selected element
The element was assigned the bypassed mode;
seeSection 5.6.4 Assigning mode, page 30.
The selected element has already been assigned
a particular mode. It is selected in order to reset
it to the original mode;
a bypassed element is unbypassed, for example.
The resetting of the element is not yet complete.
In the Bypass menu
The bypassed element is in alarm mode.
If it is un-bypassed, it triggers a fire alarm.
To display more information, press the right-hand field.
Display a bypass group that consists of several elements.
In order to display a list of all elements of the bypass group,
press the right-hand field.
Operation guide
Operating principle | en 29
F.01U.076.969 | 6.0 | 2010.04