Changing An Entry; Deleting All Numbers; Changing Language Display; Entering Key Combination - Bosch MPC-xxxx-B Operation Manual

32 en | Operating principle
Example: Entering the letter K and the number 4 in the search screen of a list
1.
2.
3.
Quick entry:
In order to enter text quickly, press the "Enter" key after entering each letter.
This takes the cursor to the next free character and you can continue with entering the next
letter.
5.8.1

Changing an entry

1.
2.
5.8.2

Deleting all numbers

1.
2.
3.
5.9

Changing language display

There are two ways to select another language display:
–
–
5.9.1

Entering key combination

1.
2.
3.
NOTICE!
After the system starts up following a power cut or battery failure, the default language
defined in the FSP-5000-RPS programming software is set again.
F.01U.076.969 | 6.0 | 2010.04
Press the key:
A sequence of letters and numbers is displayed on the info bar.
Keep pressing the key until the required letter, in this case K, is marked on the info bar. K
is displayed on the search window.
Press the key:
and hold until the 4 on the info bar is marked.
The number 4 is displayed on the search window.
In order to change a number, press the "left arrow" or "right arrow" keys until the cursor
marks the number in the search screen that is to be replaced.
To overwrite the marked number, press the key with the required number until the
number you require is displayed in the search screen.
In order to delete all numbers in the search screen, press the "left arrow" key until the
cursor marks the first number.
Enter a new number using the number pad.
All numbers up to the digit entered are deleted.
If you wish to, continue entering the numbers.
By entering a shortcut
Via a menu selection; see Section 14.2 Changing language display, page 65.
Select the "home" key immediately followed by the 1 on the alphanumeric keypad. A
query window will appear.
Select OK to confirm the entry or Cancel to cancel the operation.
A list of the existing languages is displayed.
Select the language you require.
The displays will now be shown in the selected language.
Operation guide
Panel Controller
Bosch Sicherheitssysteme GmbH