The Newest Message; Displaying Individual Elements Of An Element Group - Bosch MPC-xxxx-B Operation Manual

Panel Controller
Example:
Fault
#001
Element category:
Message type:
Address of element groups 00005: The fifth logical zone caused the first fault.
Number of individual
elements
Message number
Installation location of the
logical zone
NOTICE!
Depending on the configuration of the system, either the logical or physical address of the
element is displayed.
10.2.4

The newest message

The newest message is displayed at the end of the list.
NOTICE!
15–30 seconds after the last entry (e.g. after scrolling through the list), the first and oldest
fault message is displayed at the beginning of the list again.
10.2.5

Displaying individual elements of an element group

To display the individual elements in an element group, select the element group you require.
The fault messages of the individual elements are listed.
Bosch Sicherheitssysteme GmbH
Zone
Office 1
Different detectors in one logical zone
Fault
(6): In the fifth logical zone (00005), six detectors caused a
fault. For element groups that only consist of one element, the
number of elements is not displayed.
The fault messages are numbered chronologically.
The message number in the second line indicates the sequence
in which the fault messages were received.
001: The first and oldest fault message received.
Office 1
Operation guide
Fault message | en
00005
(6)
F.01U.076.969 | 6.0 | 2010.04
51