Operator; Change Password; Change Universal Password - Bosch MPC-xxxx-B Operation Manual

Panel Controller
18.5

Operator

Depending on whether the same password is used per access level, or whether each user has
a different password, one of the following two options is offered:
If the same password is used per access level:
–
If each user uses a different password:
–
–
NOTICE!
The password must contain at least one character.
18.5.1

Change password

1.
2.
3.
4.
5.
6.
18.5.2

Change universal password

1.
2.
3.
4.
5.
6.
Bosch Sicherheitssysteme GmbH
Change universal password: The same password can be specified for each access level
via the FSP-5000-RPS programming software. This means that all operators with access
authorization for the second level receive the same password, for example. The password
for access levels two to four can be changed.
Change operator data: Change the password of an operator.
Set default password: Reset an operator password to the following number sequence:
000000.
Select Configuration in the start menu
Operator
Change operator data
A list of all operators is displayed. Refer to Section 5.6.1 Scrolling through lists, page 28
for information on how to scroll forward and backward through a list.
Select the list field you require.
Enter a new password. Repeat the new password in the bottom field again.
On the display, each digit of the password is indicated with an asterisk so that nobody
else can see the password. Refer to Section 5.8 Entering numbers and text, page 31 for
information on how to enter figures or text.
Select OK to confirm the entry or Cancel to cancel the operation.
The entry is confirmed.
Select Configuration in the start menu
Operator
Change universal password
Depending on the access level for which the password is to be changed, select the list
field you require.
Enter a new password and repeat the entry in the bottom field again.
On the display, each digit of the password is indicated with an asterisk so that nobody
else can see the password.
Select OK to confirm the entry or Cancel to cancel the operation.
The entry is confirmed.
Operation guide
Configuration | en 83
F.01U.076.969 | 6.0 | 2010.04