User Group Summary Screen; Figure 409 Object > User/Group > Group; Table 194 Object > User/Group > Group - ZyXEL Communications ZyWALL USG 300 User Manual

Chapter 36 User/Group
Table 193 User/Group > User > Edit (continued)
LABEL
Lease Time
Reauthentication
Time
OK
Cancel

36.3 User Group Summary Screen

User groups consist of access users and other user groups. You cannot put admin users in user
groups. The Group screen provides a summary of all user groups. In addition, this screen
allows you to add, edit, and remove user groups. To access this screen, login to the Web
Configurator, and click Object > User/Group > Group.
Figure 409 Object > User/Group > Group
The following table describes the labels in this screen. See
more information as well.
Table 194 Object > User/Group > Group
LABEL
#
Group Name
Description
Member
Add icon
580
DESCRIPTION
Enter the number of minutes this user has to renew the current session before the
user is logged out. You can specify 1 to 1440 minutes. You can enter 0 to make the
number of minutes unlimited. Admin users renew the session every time the main
screen refreshes in the Web Configurator. Access users can renew the session by
clicking the Renew button on their screen. If you allow access users to renew time
automatically (see Section 36.4 on page
on their screen as well. In this case, the session is automatically renewed before
the lease time expires.
Type the number of minutes this user can be logged into the ZyWALL in one
session before the user has to log in again. You can specify 1 to 1440 minutes. You
can enter 0 to make the number of minutes unlimited. Unlike Lease Time, the user
has no opportunity to renew the session without logging out.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
This field is a sequential value, and it is not associated with a specific user group.
This field displays the name of each user group.
This field displays the description for each user group.
This field lists the members in the user group. Each member is separated by a
comma.
This column provides icons to add, edit, and remove user groups.
To add a user group, click the Add icon at the top of the column. The Group Add/
Edit screen appears.
To edit a user group, click the Edit icon next to the user group. The Group Add/
Edit screen appears.
To delete a user group, click the Remove icon next to the user group. The Web
Configurator confirms that you want to delete the user group before doing so. If you
delete the group, you do not delete the users in the group.
581), the users can select this check box
Section 36.3.1 on page 581
ZyWALL USG 300 User's Guide
for