Intel BX80571E7500 - Core 2 Duo 2.93 GHz Processor Programming Manual page 134

I ® X ® P 7500 S
NTEL EON ROCESSOR
DIMM{n}.GT_LO
DIMM{n}.LT_LO
THERM_TRP_UP
• Title: DIMM 'Up' Thermal Trip Points Crossed
• Category: Thermal Throttle
• Event Code: 0x04, Max. Inc/Cyc: 1,
• Definition: Counts when a specified thermal trip point is crossed in the "up" direction.
ALL.GT_MID_RISE
ALL.GT_MID_FALL
ALL.GT_LO
ALL.LT_LO
DIMM{n}.GT_MID_RISE
DIMM{n}.GT_MID_fALL
DIMM{n}.GT_LO
DIMM{n}.LT_LO
TRANS_CMDS
• Title: Translated Commands
• Category: Dispatch Queue
• Event Code: 0x12, Max. Inc/Cyc: 1,
• Definition: Counts read/write commands entered into the Dispatch Queue.
U P G
ERIES NCORE ROGRAMMING UIDE
THR Bits
Extension
[10:9],[3]
0x1,0x0
0x0,0x0
THR Bits
Extension
[8:7],[3]
0x3,0x1
0x2,0x1
0x1,0x1
0x0,0x1
0x3,0x0
0x2,0x0
0x1,0x0
0x0,0x0
UNCORE PERFORMANCE MONITORING
Description
Advance the counter when the above low temp, but below
mid temp thermal trip point is crossed in the "down"
direction for DIMM #?
NOTE: THR Bits [6:4] must be programmed with the DIMM
#
Advance the counter when the below low temp, but below
mid temp thermal trip point is crossed in the "down"
direction for DIMM #?
NOTE: THR Bits [6:4] must be programmed with the DIMM
#
Description
Advance the counter when the above mid temp thermal
trip point (rising) is crossed in the "up" direction for any
DIMM
Advance the counter when the above mid temp thermal
trip point (falling) is crossed in the "up" direction for any
DIMM
Advance the counter when the above low temp, but below
mid temp thermal trip point is crossed in the "up" direction
for any DIMM.
Advance the counter when the below low temp thermal trip
point is crossed in the "up" direction for any DIMM
Advance the counter when the above mid temp thermal
trip point (rising) is crossed in the "up" direction for DIMM
#?
NOTE: THR Bits [6:4] must be programmed with the DIMM
#
Advance the counter when the above mid temp thermal
trip point (falling) is crossed in the "up" direction for DIMM
#?
NOTE: THR Bits [6:4] must be programmed with the DIMM
#
Advance the counter when the above low temp, but below
mid temp thermal trip point is crossed in the "up" direction
for DIMM #?
NOTE: THR Bits [6:4] must be programmed with the DIMM
#
Advance the counter when the below low temp, but below
mid temp thermal trip point is crossed in the "up" direction
for DIMM #?
NOTE: THR Bits [6:4] must be programmed with the DIMM
#
2-122