Download Error Codes - Toshiba e-STUDIO4500c Service Manual

PROGRAM DOWNLOAD

4.1.3 DOWNLOAD ERROR CODES

Display
01 Reboot after
SD card insert E01
Module ID
Card No. xx/xx
02 Download Error E02
Power OFF/ON
03 Download Error E03
Power OFF/ON
04 Download Error E04
Power OFF/ON
05 Download Error E05
Power OFF/ON
06 Download Error E06
Power OFF/ON
19 Download Error E19
Power OFF/ON
20 Down Error E20
Power Off/On
21 Download Error E21
Power Off/On
Details
Controller ROM update error 1
When the update break data is stored in
NVRAM, the break module information and
the decompression module capable of
writing do not match.
Controller ROM update error 2.
Error occurs during ROM update program
initialization.
Controller ROM update error 3
The ROM for the write operation does not
exist.
Controller ROM update error 4
GZIP data confirmation fails. (CRC value
check)
Controller ROM update error 5
Error occurs when writing to the device.
Controller ROM update error 6
CPU clock error.
Controller ROM update error 7
Schedule data is unclear.
System error 1 (+SC991)
The physical address cannot be mapped.
Software/hardware is defective
System error 2 (+SC991)
There is not sufficient memory to
download.
4-2
April, 2007
Recovery
Use the correct card
Cycle the machine
OFF/ON to rewrite
Cycle the machine
OFF/ON
Install the missing ROM
DIMM
Cycle the machine
OFF/ON
Set DIP SW 1 to ON
and retry
Replace RAM DIMM
Replace controller board
Cycle the machine
OFF/ON
Set DIP SW 1 to ON
and retry
Replace RAM DIMM
Replace controller board
Turn the machine power
OFF/ON.
Set controller DIPSW-1
to ON to force the
machine to write to
ROM.
If you cannot force the
machine to write,
replace the controller
board.
Software defective
Cycle the machine
OFF/ON and re-try
Replace controller board
Cycle the machine
OFF/ON and re-try.
Replace RAM
Replace the controller
board