Booklet Stapling (B700 Only); Booklet Pressure Mechanism - Toshiba e-STUDIO4500c Service Manual

August 2006

2.9 BOOKLET STAPLING (B700 ONLY)

2.9.1 BOOKLET PRESSURE MECHANISM

As soon as the edges are aligned by the positioning roller and the jogger fences,
the stack feed out belt moves.
In booklet mode, immediately after the edges are aligned by the positioning roller
and jogger fences, the booklet pressure solenoid switches on and the booklet
pressure roller presses down on the stack until booklet stapling is finished. This
prevents the stack from shifting during stapling.
[A]: Booklet Pressure Roller Solenoid (SOL5)
[B]: Booklet Pressure Roller Arm
[C]: Booklet Pressure Roller
B700-49
BOOKLET STAPLING (B700 ONLY)
B700D305.WMF
[A]
[B]
[C]