Controller Board, 256 Mb Memory, Nvram - Toshiba e-STUDIO4500c Service Manual

BOARDS

3.14.2 CONTROLLER BOARD, 256 MB MEMORY, NVRAM

Important:
If you are going to replace the NVRAM, follow the procedure on the next page
and refer to these illustrations as necessary.
Do not remove the NVRAM until you have uploaded is contents. (For more, see
the procedures on the following page.)
Always touch a metal surface to discharge any static on your hands before you
touch the controller board.
Work carefully when removing the NVRAM to avoid damaging other components
on the controller board or short circuiting the pins of other chips.
[A]: Options slot covers
[B]: Controller board (
[C]: NVRAM (Pawls x2)
[D]: 256 MB memory
Reinstallation
If you replace the controller board, put the memory and NVRAM from the old
controller board onto the new controller board.
[A]
[C]
[D]
B132R711.WMF
, , ( x 2 each)
x 2) ( 3.14.1)
3-134
August, 2006
[B]
B132R712.WMF