Toshiba e-STUDIO4500c Service Manual page 549

April, 2007
2515 Size Coeff:Thk
These settings 1) apply to paper widths up to SP2308 004 Threshold 4, 2) apply to
image areas only, 3) apply to thick paper mode (1/2 speed: 128 to 256 g/m²).
007 Side1:Size5:PTR
012 Side2:Size5:PTR
2521 LEdge Cor:Thk:K
This SP sets the coefficient used to 1) correct bias at the leading edge for black
image transfer (ITB), 2) bias at image to paper transfer on thick paper, and 3) correct
the dc and ac voltages applied at paper separation.
Notes: These settings apply:
To the distance from the leading edge set with SP2522 001
Only to black printing on plain paper at half-speed (128~256 g/m²), regardless
of whether black-and-white or full-color is selected.
001 ITB
007 Side1:PTR
008 Side1:SepDC
009 Side1:SepAC
012 Side2:PTR
013 Side2:SepDC
014 Side2:SepAC
2522 LEdge SWT:Thk:K
This SP sets switch timing that switches OFF the application of SP2521 for thick
paper. The value selected is the number of mm from the leading edge of the paper.
These settings 1) apply only to black printing on thick paper at half-speed (128~256
2
g/m ). and 2) apply to to both sides of a duplex page.
001 ITB
002 PTR
003 SepDC
004 SepAC
2523 TEdge Cor:Thk K
This SP sets the coefficient used to correct bias at image to paper transfer for each
side of the paper. These settings are applied to the trailing edge for black printing on
thick paper (128~256 g/m
full color mode.
007 Side1:PTR
012 Side2:PTR
2524 TEdge Cor:Thk:K – PTR
This setting sets the start timing for application of SP2523 012 at the trailing edge of
each sheet (Side 1, Side 2). This setting is applied to the trailing edge for black
printing on thick paper (128~256 g/m
when printing in full color mode.
[-100~0/1 mm]
Size Correction Coefficient: Thick Paper
[100~600/1%]
[100~400/1%]
Leading Edge Correction: Thick Paper: K
[0~400/1%]
[0~400/1%]
[0~400/1%]
[0~400/1%]
[0~400/1%]
[0~400/1%]
[0~400/1%]
Leading Edge Switch Timing for Thick Paper: K
[0~30/1 mm]
[0~30/1 mm]
[0~30/1 mm]
Trailing Edge Correction for Thick Paper: K
2
) at half-speed and apply to black, even when printing in
[0~400/1%]
Trailing Edge Correction for Thick Paper: K
2
) at half-speed and applies to black, even
5-57
SERVICE PROGRAM TABLES