Toshiba e-STUDIO4500c Service Manual page 295

DUPLEX UNIT
[F]
[C]
[A]: Jogger fences (
[B]: Left transport cover (
The front screw is a shoulder screw. Insert the screws in the correct holes
when re-attaching.
To avoid breaking the tabs under the left edge of the table, pull the table to
the right to disengage the tabs and then remove.
[C]: Transport sensor 1 ( x 1,
[D]: Transport sensor 2 ( x 1,
[E]: Inverter exit sensor (
Reinstallation
Make sure the end tabs [F] of the left transport cover are engaged correctly.
[E]
x 1 ea.)
x 2)
x 1)
x 1)
x 1, x 1,
3-108
[D]
x 1)
August, 2006
[A]
[B]
[F]
B132R507.WMF