Firmware Update; Firmware Update Procedure - Toshiba e-STUDIO4500c Service Manual

April, 2007

5.4 FIRMWARE UPDATE

5.4.1 FIRMWARE UPDATE PROCEDURE

SD cards are used to update the software and to back up important data. Here is a
list of the firmware modules that can be updated or restored from an SD card:
GW controller software
BICU software
LCDC (operation panel) software
Network Sys (network) software
Web Sys (Web Image Monitor)
Document Server software
NFA (Net File) software
Printer application software
Scanner application software
DESS (encryption module) software
Important: Always obey these rules when handling and using SD cards:
Never connect or remove an SD card with the machine powered ON.
Never turn the power OFF while the machine is downloading data from an SD
card.
The SD card is a precision item. Use it carefully. Do not keep the card in a
location where there is high temperature, high humidity, or light from the sun.
Never bend an SD card, make scratches on it, or apply strong shock or vibration
to it.
5-11
FIRMWARE UPDATE